The HIROSS AIR HR-388 is an industrial dehumidifier that removes 15 L of water per hour — 360 L per day — from rooms of 400–500 m². A 4,000 m³/h airflow keeps the whole space circulating rather than treating only the air next to the unit, and the 5.4 kW compressor runs on a 380V / 50Hz supply. Operation is rated from 5 to 38 °C, so the machine works in production halls, warehouses and cold rooms as well as in normal indoor conditions. Condensate is discharged through a hose drain for continuous running; the cabinet stands 1200 × 500 × 1700 mm on castors and weighs 200 kg.
| Parameter | Specification |
| Product name | Industrial dehumidifier |
| Model | HR-388 |
| Dehumidifying capacity | 15 L/h (360 L/day equivalent) |
| Airflow (circulation) | 4,000m3/h |
| Rated power | 5.4 kW |
| Power supply | 380V/ 50Hz (or custom) |
| Room coverage | 400-500㎡ |
| Working temperature | 5-38℃(32-100 °℉) |
| Dimensions (WxDxH) | 1200x500x1700mm |
| Weight | 200kg |
| Drain | Hose drain (continuous) |
| Control | Top-mounted control panel with display |
| Mobility | Castors fitted at the base |
1. 15 L/h — 360 L per day The capacity is stated in litres per hour as well as per day, which is the number a site engineer needs: a 15 L/h machine clears roughly 360 L in 24 hours of continuous running. Wet screed, soaked insulation and damp stock all give up their moisture at a rate that keeps up with a working schedule.
2. 4,000 m³/h airflow A high airflow matters as much as the compressor: the machine turns the whole room over instead of drying the air around itself. In a 400–500 m² hall, that means the far corner dries at a similar rate to the corner where the unit stands.
3. 400–500 m² coverage per unit The coverage figure gives a buying rule before any site survey: one unit for a hall of this size, two for double the area, and a check on ceiling height before anything is ordered. Buyers can size the order from the drawing instead of waiting for a site visit.
4. Working range 5–38 °C The machine is rated from 5 °C, so it can run in unheated warehouses and cold stores as well as in production halls at normal temperature. Above 38 °C the rating no longer applies, which is why the limit is printed on the unit rather than left to assumption.
5. 5.4 kW on 380V / 50Hz, or custom A 380V three-phase supply is what an industrial site already has, and a 5.4 kW load is small enough to run from a standard distribution board without a dedicated feeder. Other voltages and frequencies can be specified where the site supply differs.
6. Hose drain for continuous operation Condensate leaves through a hose instead of a tank that has to be emptied. On a drying job that runs for days, this removes the one task that otherwise stops the machine: nobody has to be on site to tip a bucket.
7. 1200 × 500 × 1700 mm cabinet on castors The footprint is narrow for the capacity, so the unit fits between racks and along a wall. Castors let one person move it from bay to bay as a drying job progresses, without a forklift.
8. 200 kg — built as a working machine The mass comes from the compressor, coils and cabinet, and it keeps the unit steady while the fan runs. It also tells the buyer what handling to plan for on delivery: a pallet truck rather than two people, and once the unit is in place it does not need to be bolted down.
Warehouses and logistics centres — humidity control for cartons, packaging and hygroscopic goods.
Production halls — humidity kept within limits where moisture affects process quality or machine reliability.
Cold stores and unheated buildings — operation from 5 °C covers chilled rooms and winter conditions.
Food and beverage plants — condensation control in processing and packing areas, where dripping water is a hygiene risk.
Printing and paper — humidity control where paper curls, jams or misregisters when the air is damp.
Textile and leather — drying rooms and storage where moisture causes mould and dimensional change.
Construction and renovation — drying wet screed, plaster and insulation before flooring or painting.
Electronics and instrument assembly — humidity kept low to protect boards, solder and contacts from corrosion.
Archives, stores and equipment rooms — protection for paper records, spare parts and electrical cabinets.
Q1. Are you a manufacturer or a trading company?
A1.We are a professional manufacturer in Fujian, China, offering OEM & ODM service.
Q2. What is your delivery time?
A2. Usually within 15 days; for urgent orders, please contact our sales staff in advance.
Q3. What payment terms do you accept?
A3. T/T, L/C, D/P, Western Union and credit card, in USD, RMB or EUR.
Q4. What about warranty and after-sales service?
A4.One-year spare parts warranty, online installation guidance, overseas engineer service and 24-hour support.
Q5. How can I visit your factory?
A5.Our factory is in Zhangzhou, Fujian, about one hour from Xiamen Airport; we can arrange pickup.