HIROSS AIR HRBS-110AGR shine desiccant air dryer na biyu (twin-tower) wanda ya dace da 11 m³/min, da pressure dew point na -20 zuwa -40 °C, don aminin da suka nufi kuma ba su iya amfani da refrigerated drying ba saboda yana zama babu kara fuskanci. Biyu na stainless steel towers (A da B) suna gudanar da activated alumina da molecular sieve media wanda suka taka da saurin aiki (regenerated in service) ba su kawo su cikin kowane lokaci na maintenance ba. Inlet air ya kamata ya kasance babu 40 °C. Cabinet mai LCD touchscreen ya kawo control da operating status. Unit shine ta zama a cikin stainless steel skid base, da tagged valve manifold don fahimtar maintenance.
| Paramita | Rubutun |
| Sunan Samfuri | Na'urar Busar da Iska Mai Daskarewa |
| Samfur | HRBS-110AGR |
| Karamin karamin na saukar da yadda ake saukarwa | 11 m³/min |
| Tashin yadda uku ya dace | -20 zuwa -40°C |
| Yawan kwalla ta hanyar gida | ≤40℃ |
| Desiccant media | Activated alumina da molecular sieve |
| Tower configuration | Twin tower (A / B), stainless steel mai ƙarfi da kari |
| Tacewa | LCD touchscreen, cabinet na kontroli mai tsaya a cikin |
| Piping da valves | Aluminium piping, flanged; tagged butterfly valves |
| Base Frame | Stainless steel skid base frame |
1. Pressure dew point of -20 to -40 °C The dryer reaches dew points well beyond the range of a refrigerated dryer, so air stays dry even in long outdoor lines, in cold climates and in processes that cannot tolerate condensed moisture at the point of use.
2. Twin-tower design for continuous drying Two towers (A and B) work in sequence: while one dries the air stream, the other is regenerated. Drying continues through the changeover, so the downstream process does not see a wet-air interval during regeneration.
3. Activated alumina and molecular sieve media The two desiccants are combined in one unit: activated alumina takes the bulk of the moisture, and molecular sieve polishes the air to the final dew point. Media are regenerated in service rather than being replaced on every service visit.
4. Tawarar kofin stainless steel da aka fayyade. Tawarar kofin an yi su daga stainless steel kuma aka fayyade su da jikin fayyade. Stainless steel yana gaskiya ga kusursun daga hawayen yawa da condensate, kuma jikin fayyade yana kare tsin koyaya wanda ake amfani da shi a lokacin regeneration, wanda shine lokacin da desiccant dryer ya zama ƙarami idan tawarar kofin ba su da fayyade.
5. LCD touchscreen control a cikin cabinet mai sauraro. Cabinet na control yana da LCD touchscreen kuma uku na push buttons, domin kuskuren stop, kuma kofin lock yana kare sittinsu daga yadda masu alheri ba su da izini. Alamar yadda ake amfani da shi ana karanta su a panel ba a cikin alamar biyu na separate a skid.
6. Manifold na kwayoyin da suka daga taga Manifold na kwayoyin ana sa a amfani da taga (koda K da V) wanda suka hada da tsari na kwayoyin da tsarin bayanai. A lokacin da aka shiga ko lokacin da yawa, masu ingantaccen suna gano kwayar daga taga ba tare da kuskuren kwayoyin, wanda ke zama mafi kyawun lokaci na aiki. Kwayoyin da suka daga taga na kuma iya amfani da su don samun kwayoyin da suka daga taga, don haka abin da za a sanya a cikin wani wurin da ya kashe.
7. Kwayoyin aluminium da kwayoyin da suka daga flange Kwayoyin ana amfani da aluminium da kwayoyin da suka daga flange da suka daga bolt, wanda ke kara mafi yawan kwayoyin da ke cikin kwayoyin da ke zama mafi kyawun aiki a wurin da ke cikin kwayoyin.
8. Base frame da aka sanya a cikin skid da aka sanya a faburuk, towers, kwayoyin, kwayoyin da control cabinet suna sanya a cikin wani base frame na stainless steel. Bayanin ya zo a cikin wani package da wani lifting point, don haka aiki a wurin da ke cikin kwayoyin ya kashe kuma a cikin kwayoyin da suka daga air, condensate da power.
9. An gaba da 11 m³/min don hanyar fuskanci na yaki da kuma 40 °C. Tushen 11 m³/min zai iya taimaka wani sistan na hanyar yaki na wasu mutane. Saboda hanyar fuskanci ya kashe 40 °C, bayanin yanzu yana nuna cewa kamar yadda ake amfani da dryer mai saukin yaki ko cooler na baya a cikin kishin.
Tambaya 1: Ka shiga ne ko ka taimaka ne?
Amsa 1: Mu ne masu sanya abubuwa a Fujian, China, mu nuna OEM & ODM service.
Tambaya 2: Wani lokaci ne ka sanya abubuwa?
A2. A yaya a cikin 15 rana; don ƙwararri na koyaushe, da fatan za a sallama abokan al'umma na bayanan a baya.
T3. Wane shari'a na bayani suka yi?
A3. T/T, L/C, D/P, Western Union da kadi na bayani, a USD, RMB ko EUR.
T4. Yaya ne takaici da al'ummar da aka ci gaba daya?
A4. Takaici na 1 ranar da abubuwan da ke cikin kasa, al'ummar na kafa a cikin internet, al'ummar na inginiya a waje da al'ummar na 24 sa'a.
T5. Ina iya zuwa gida na amfani?
A5. Gida na amfani shine a Zhangzhou, Fujian, wanda ke cikin saati 1 daga Xiamen Airport; za mu iya sanya abubuwa don kara.
EN
