The HIROSS AIR HRBS-110AGR is a twin-tower desiccant air dryer rated at 11 m³/min with a pressure dew point of -20 to -40 °C, for applications where refrigerated drying is not dry enough. Two stainless steel towers (A and B) hold activated alumina and molecular sieve media that are regenerated in service instead of being replaced on every service interval. Inlet air is limited to 40 °C. An integrated cabinet with an LCD touchscreen carries the control and operating status. The unit stands on a stainless steel skid base, with a tagged valve manifold for clear maintenance.
| Parametrum | Specificatio |
| Nomen producti | Exsiccator Aeris Desiccantis |
| Modellum | HRBS-110AGR |
| Capacitas aeris nominalis | 11 m³/min |
| Punctum Roris Sub Pressione | -20 to -40 °C |
| Max. inlet air temperature | ≤40℃ |
| Desiccant media | Activated alumina and molecular sieve |
| Tower configuration | Twin tower (A / B), insulated stainless steel |
| Regulatio | LCD touchscreen, integrated control cabinet |
| Piping and valves | Aluminium piping, flanged; tagged butterfly valves |
| Structuram basalem | Stainless steel skid base frame |
1. Pressure dew point of -20 to -40 °C. The dryer reaches dew points well beyond the range of a refrigerated dryer, so air stays dry even in long outdoor lines, in cold climates and in processes that cannot tolerate condensed moisture at the point of use.
2. Twin-tower design for continuous drying. Two towers (A and B) work in sequence: while one dries the air stream, the other is regenerated. Drying continues through the changeover, so the downstream process does not see a wet-air interval during regeneration.
3. Activated alumina and molecular sieve media. The two desiccants are combined in one unit: activated alumina takes the bulk of the moisture, and molecular sieve polishes the air to the final dew point. Media are regenerated in service rather than being replaced on every service visit.
4. Turres ex acciaio inox isolatae. Turres ex acciaio inox construuntur et cum vestimento isolante cooperiuntur. Acciaium inox corrosionem ab aere humido et condensato resistit, et vestimentum isolans calorem in regeneratione retinet, ubi desiccator adsorbens inefficax fit, si superficies turris nuda maneat.
5. Controllo per tactum LCD in armario integrato. Armarium de controllo continet schermum LCD per tactum simul cum tribus pulsatoribus, inter quos est pulsator pro arrestu urgenti, et clausura ostii parametra a manibus non autorizatis protegit. Status operationis in tabula legitur, non ex indicibus separatis in scapha.
6. Valvulae signatae in collectore. Collector valvarum signatus est numeris (codices K et V), qui diagrammatis tuborum et instrumentorum respondent. Dum machina in operationem venit aut defectus oritur, ingeniorum peritus valvulam ex signo identificat, non ex ductibus investigandis, quod tempus servitii breviat. Valvulae suppletoriae etiam ex eisdem signis ordinari possunt, ita ut pars substituta loco suo congruat.
7. Tubi ex aluminio et iuncturae flangatae. Tubi ex aluminio sunt, iuncturae vero flangatae et clavis coniunctae, quae totam structuram leviorem reddunt et substitutionem iunctionum in loco faciliorem faciunt.
8. Structura basalis in scapha montata et in officina composita. Turres, valvulae, tubi et arca controlis in una structura basali ex accipensino montantur. Totum apparatus unum pachetum est, unico puncto sublevandi, ita ut opus in loco ad coniungendum aerem, condensatum et vim electricam restringatur.
9. Certificatus pro 11 m³/min cum aere intrante usque ad 40 °C. Capacitas 11 m³/min apta est pro systematibus aeris plantarum mediocris magnitudinis. Quia limis intrantis est 40 °C, specificatio clare indicat quod siccatorem refrigeratum vel post-refrigeratorem normaliter ante unitatem installare oportet.
Q1. An fabricator aut mercatura societas es?
A1. Nos sumus fabricator professionalis in Fujian, China, qui servitium OEM & ODM praebet.
Q2. Quae est vestra tempus expeditionis?
A2. Solent 15 dies; pro ordinibus urgentibus, amice ad nostrum personale venditionis ante consule.
Q3. Quae condicionis pecuniarum accipitis?
A3. T/T, L/C, D/P, Western Union et carta creditoris, in USD, RMB aut EUR.
Q4. Quid de garantiis et post-venditionis auxilio?
A4. Unius anni garantiā pro partibus separatīs, ductus installationis per interretium, auxilium ingeniorum externorum et subsidium 24-horarum.
Q5. Quomodo ad fabricam vestram venire possum?
A5. Fabrica nostra est in Zhangzhou, Fujian, circa unam horam a Aeroporto Xiamen; nos curare possumus ut vos advehamus.
EN
